RATERMANN Cryogenics T (844) 341-3433 S F (844) 341-3444 S Website: www.rmicryo.com S Email: [email protected] 37L-11 How to Order – Series 44 How to Order – Series 44 Series 44 Three Piece Ball Valves **Variations (V–Numbered Options) are noted at the end of the order number if needed. Leave blank if no variations. See list to the right for details. NOTE: TO ORDER V67 WELD–IN–PLACE VALVES: Series 44 valves with “G” body seals and seats of Reinforced TFE (R), Polyfill (P), or High–per Fill (X) may be welded in a line in the assembled condition. Add V58 to ordering code if full B16.34 compliance is required. Full ANSI B16.34 compliance requires a hydrotest and certified material test reports. ORDERING EXAMPLE: 11/4" Series 44 valve with 316 S.S. body, ball and stem, TFE seats and seals, and socket weld ends. EXTERNALS: Externals, including handles, are normally con- structed of zinc plated carbon steel. Handles are vinyl coated. When required, the body bolts, nuts, retaining nut, handle nut, lock washer, stop pin and handle are also available in stainless steel by special order (S–7 suffix in ordering code), and come standard when ordering 4466 Stainless Steel or 44AA Alloy 20 valves. †All IPS schedules of stainless, carbon and alloy steel pipe, S.P.S. copper pipe and red brass pipe. ††To order a Series 44 valve for use with: 34 or 36 actuators, use prefix ordering code “A”. EXAMPLE: 1" A 4446 6 PMSE, or with 39 or 75 actuators, use prefix ordering code “B”. . CAUTION: Ball valves can retain pressurized media in the body cavity when closed. Use care when disassembling. Always open valve to relieve pressure prior to disassembly. Variations (V-numbers): Listing of V-Number Descriptions V3 Upstream Relief Hole V5 Hydrostatic Testing V6 Source Inspection V17 Grounding Thrust bearing V20 Oxygen Service V32 Oval Handle V33 Oxygen Service without Source Inspect. V36 Certificate of Compliance V37 Certificate of Compliance and Hydro Testing V38 Assemble without Lubricant V46 Silicon-free Lubricant V48 Extended Lever Handle V58 B16.34 Compliance V59 Extended Oval Handle V60 OSHA Lockout V67 Weld-in-Place Valves V72 Cert. of Comp. European Pressure V73 Valves or repair kits with cavity filler seat V74 CMTRs and Hydro Testing and report V77 CMTRs Monel® is a registered trademark of Inco Alloys International. Hastelloy® is a registered trademark of Haynes International. Tri-Clamp® is a registered trademark of Ladish Co. Viton® is a registered trademark of E.I. duPont. Polyfill® is a registered trademark of Flowserve Corp. Lubetal™ is a trademark of Garlock, Inc. ACCESS™ is a trademark of Flowserve Corp. Alloy 20® is a trademark of CRS Holdings, Inc. Pulsair® is a registered trademark of Flowserve Corp. High-per Fill® is a registered trademark of Flowserve Corp. Dyn-O-Miser® is a registered trademark of Flowserve Corp. Viton®, PTFE, and Delrin® are registered trademarks of The DuPont Company. WC-44 1-. Brass 4- Carbon Steel 6- 316 Stainless A- Alloy 20 1-. Brass (chrome plated) 4- Carbon Steel (chrome plated) 6- 316 S.S. 7- Monel A- Alloy 20 C- Hastelloy C B-. Buna N- Neoprene T- TFE E- EPR V- Viton M-. TFE Coated 316 S.S. G-. Graphite – Coated 316 S.S. U- UHMWPE 14- 1/4” 38- 3/8” 12- 1/2” 34- 3/4” 1- 1” 1 14- 1 1/4” 1 12- 1 1/2” 2- 2” (blank) Built with Level Handle E- No Handle valve built for automation A- No Handle†† B- No Handle†† G- Stem Grounding Spring K- Locking Handle V- Vacuum Service Prep X- Oxygen Service Prep SE- Screwed Pipe Ends (NPT) Any Sch. Pipe† Carbon Steel, Stainless Steel Alloy Butt Weld (BW) ends: BW1- Stainless Steel Sch. 10 BW4- Carbon Steel Sch. 40 BW4- Stainless Steel Sch. 40 BW5- Stainless Steel Sch. 5 BW8- Carbon Steel Sch. 80 TE- Solder/Sweat Ends Brass – Type K, L, or M Copper SW- Socket Weld Ends, Any Sch. Pipe†, Carbon Steel, Stainless Steel, Alloy 20 SWO- Socket Weld Ends OD Tube S.S. (not available in 1/4” and 3/8” sizes) TC- Quick Disconnect XBO- Extended Butt Weld NP- No Pipe Ends, body bolts and nuts B-. Buna N- Neoprene T- TFE R- Reinforced TFE P- Polyfill U- UHMWPE X- High-per Fill Y- Lubetal WC-44 – – – – 66 66 T T SW 114 SERIES BODY: PIPE ENDS BALL: STEM SEAT BODY SEAL END TYPE SIZE OPTIONS WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov For further information on Proposition 65, please go to www.oehha.ca.gov/proposition-65
